(16)
(9)
2. Switch the fridge off by pressing the sen-
sor button REF.TEMP. (16) until two dash-
es and ‘
’ appear in the display. A short
time later, the temperature of the freezer
and ‘– –’ will be displayed alternately.
As a result the fridge is switched off.
Switching the fridge back on again
1. Unlock the sensor buttons by pressing
the sensor button UNLOCK (13) until the
indicator (9) appears (see also “Unlock
sensor buttons” on page EN-13).
2. Switch the fridge on again by pressing the
sensor button REF.TEMP. (16) until the
temperature indicator ‘ ’ appears in the
display.
As a result the fridge is switched on
again.
3. If necessary, change the temperature in
the fridge (see “Changing the temperature
in the fridge” on page EN-14).
Door alarm
The use of energy and the temperature inside
the appliance can increase if the doors are
opened often or for long periods of time.
To avoid an excessive loss of cooling, a tone
will sound when one or both doors of the
Side by side fridge freezer have been open
for more than 2 minutes.
Glass shelves and door
shelves
The glass shelves (2) and the door shelves (4)
can be removed. This means that you can
clean them more easily or rearrange them if
necessary. To remove the door shelves, lift
them upwards out of the guide bar.
You will achieve the most efficient use of en-
ergy for your appliance if you combine the
drawers, glass shelves and door shelves as
shown in the diagram on page EN-11.
Operation
Page EN-15
