Page EN-36
Troubleshooting table
Problem
Possible cause
Solution
The dishes are
not completely
clean.
There are food scraps which
are encrusted onto the dishes.
Soak dirty dishes prior to washing the
dishes.
The dishes have not been
stacked optimally.
Stack the dishes in such a way that all
parts can be reached by the water jets
(see “Loading the dishwasher” on
page EN-18).
You have selected the
incorrect dishwashing
programme.
Select the correct dishwashing pro-
gramme (see “Programme table” on
page EN-22).
The dishwasher detergent is
incorrectly dosed.
Use the correct dosage of dishwasher
detergent (see “Programme table” on
page EN-22).
The water pressure is too low. Turn the water tap on completely.
The spraying arm can not
rotate unhindered.
Ensure that no dishes are impeding the
motion of the spraying arm.
The nozzles on the spraying
arm are blocked/calcified.
Clean the nozzles (see “Checking
and cleaning the spraying arms” on
page EN-28).
Error indicators
Code
Cause
Solution
Rapid
Programme display
“Short” flashes very
fast.
Insufficient water
inflow.
Turn the water tap on completely.
Arrange the inlet hose properly so that it is
not kinked (see “Connect the inlet hose” on
page EN-32).
Ensure that the water pressure is correct.
See “Technical specifications” on page EN-39.
Programme display
“Glass” flashes
very fast.
Glass
Water overflow
Switch off the tap. Find the gap in the seal
(or have someone find it) and repair the leak
(or have it repaired).
Rapid
Programme
displays “90 min.”
and “Rapid” flashes
very fast.
90 min.
Required temperature
not reached.
Have the appliance examined and repaired.
