Page EN-30
Set-up, connection and initial start-up
Substructure
NOTICE
Risk of damage!
Selecting the wrong screws can dam-
age the worktop.
■
Select the correct screws with the ap-
propriate screw length.
■
Use the enclosed screws.
Inlet/outlet area
and electrical
connection.
Recess dimensions
90°
600 mm
820 mm
100 mm
580 mm
80 mm
90°
Requirements:
• Only install the dishwasher underneath a
continuous worktop which is joined to the
units adjacent to the dishwasher.
• Maintain sufficient distance from the walls
and adjacent appliances. The recess
dimensions must at least correspond to
the details in the diagram above, ‘recess
dimensions’.
1. Remove cardboard, polystyrene and ad-
hesive strips from the inside of the dish-
washer, if you have not already done so.
