Removing cold water and ice
Page EN-27
Dispensing ice cubes
To remove the ice cubes, use a container with
an opening of at least 7 cm, in order to pre-
vent ice from escaping around the sides.
When you switch the appliance set-
tings from crushed ice dispensing to
“Dispensing ice cubes”, residual
crushed ice will be initially dispensed
from the ice outlet.
QUICK FRZ
QUICK REF
FILTER RESET /3S
HOLD 3S UNLOCK
(24)
(26)
1. Press the (24) DISPENSER selection but-
ton enough times until the (26) symbol
appears on the display.
HOLD 3S UNLOCK
(33)
(34)
2. Hold the container as close as possible
to the opening of the ice dispenser (34) to
prevent ice cubes from escaping.
3. Push the container against the dispenser
guide (33). Ice cubes will begin to pour
into the vessel.
4. Remove the vessel from the dispenser
guide to stop the flow of ice cubes.
Locking/unlocking the ice
maker
Locking
If you plan not to use the cold water and ice
dispensing functions for an extended period
of time, you can lock the ice maker:
QUICK FRZ
QUICK REF
FILTER RESET /3S
MODE
(27)
(29)
1. If applicable, unlock the control panel by
pressing the (21) LOCK/UNLOCK button.
2. Press button (29) ICE OFF. The (27)
symbol lights up on the display.
(32)
(2)
3. Lock the ice dispenser (2) using the lock-
ing box (32) to conserve energy.
Unlocking
1. Remove the locking box (32) and close
the door to the freezer.
2. Unlock the control panel by pressing
the (21) LOCK/UNLOCK button.
3. Press button (29) ICE OFF.
