Start-up
Page EN-23
– If underfloor heating is installed at the set-
up location, place the cooling appliance on
an insulation plate made from solid mate-
rial.
Minimum distances
Space requirement
63
7
11
3
5
840
135°
1. Check the position of the appliance with a
spirit level.
2. Level out any unevenness on the ground
using both of the front screw feet.
3. Tilt the appliance backwards slightly and
screw/unscrew the screw feet.
4. Repeat the adjustment until the appliance
is upright and secure. The appliance
should not wobble when opening the
doors.
Cleaning before use
In order to remove the odour which is pres-
ent in all new appliances, wipe the fridge and
freezer compartment out prior to first use
with a solution made from 100 ml vinegar
and 200 ml water. Then wipe it out with clean
water and dry all of the parts off afterwards.
Electrical connections
• Insert the mains plug into an easily ac-
cessible and properly installed socket
(220–240 V~ / 50 Hz).
You will find all important information
about operation from page EN-11.
Summary of Contents for 27829427
Page 64: ......
