Page EN-38
Troubleshooting table
Problem
Possible cause
Solution
The dishes are not
completely clean.
There are food scraps which
are encrusted onto the dishes.
Soak dirty dishes prior to washing
the dishes.
The dishes have not been
stacked optimally.
Stack the dishes in such a way
that all parts can be reached by
the water jets (see “Loading the
dishwasher” on page EN-17).
You have selected the in-
correct dishwashing pro-
gramme.
Select the correct dishwashing
programme (see “Programme ta-
ble” on page EN-21).
The dishwasher detergent is
incorrectly dosed.
Use the correct dosage of dish-
washer detergent (see “Pro-
gramme table” on page EN-21).
The water pressure is too low. Turn the water tap on completely.
The spraying arm can not
rotate unhindered.
Ensure that no dishes are imped-
ing the motion of the spraying arm.
The nozzles on the spraying
arm are blocked/calcified.
Clean the nozzles (see “Checking
and cleaning the spraying arm and
spray nozzles” on page EN-28).
Error indicators
Code
Solution
E1
: It takes too long for
the water to fill up
Turn the water tap on completely.
Arrange the inlet hose properly so that it is not kinked (see “Con-
necting the inlet hose” on page EN-30).
Ensure that the water pressure is correct. See “Technical specifi-
cations” on page EN-41.
E3
: The heating element
is defective
Have the appliance examined and repaired.
E4
: Water overflow
Switch off the tap. Find the gap in the seal (or have someone find
it) and repair the leak (or have it repaired).
E8
: Internal fault
Have the appliance examined and repaired.
ED
: Internal fault
Have the appliance examined and repaired.
EC
: Washing control
system fault
Have the appliance examined and repaired.
Summary of Contents for 21172263
Page 44: ...Entsorgung ...
Page 86: ......
