HGS17060EW, HGS17060ES
Setting up the freezer
EN-13
Positioning the freezer
The freezer must stand on a level, solid surface. For the best result,
check the position of the appliance with a spirit level. When you
open the door, the freezer should not move. You can balance out
unevenness in the surface with the two front adjusting feet.
1. Close the freezer door.
2. Tilt the freezer backwards slightly.
3. Screw/unscrew the screw feet as required.
4. Stand the freezer straight up once again and check its align-
ment with a spirit level.
5. Repeat these steps until the freezer is level.
To ensure sufficient air circulation, the entire space above the
freezer must remain clear of obstructions. Do not place the freezer
directly against the wall. Leave space of at least 3 cm.
11
Attaching the door handle
Depending on which side the door hinge is installed, you can at-
tach the door handle
4
.
1. Loosen the two side screws on each side of the door.
2. Use the supplied screws to attach the door handle
4
.
3. Cover the screws with the supplied cover caps.
Summary of Contents for 17800610
Page 52: ......
