Assembly
Page EN-19
(3)
(10)
(7)
6. Attach the retaining plate (7) to the lower
flue screen (3) with two screws (10).
(1)
(3)
(7)
7. Place the flue screen (3) on the exhaust
hood (1) and mark the two drill holes for
the retaining plate (7).
(3)
(6)
8. Remove the flue screen (3) from the
exhaust hood again and drill holes into
the marked spots with a diameter that
correspond to the wall plugs.
9. Hammer two wall plugs into the drilled
holes.
10. Attach the flue screen (3) to the wall with
two screws.
(5)
11.
For exhaust air operation:
Push the
end of the exhaust air hose (4) with the
larger diameter (153 mm) onto the cooker
hood.
12. Feed the mains cord into the flue screen
until it reaches the socket and insert the
mains plug into the socket.
