HANSCRAFT IN.K1000, User Manual, Page: 20 / 28

20
Control panel/ Upkeep of the hot tub
5.16 Error messages about installation
After switching on Smart Touch on your bath you may see one of the two error
messages. Please follow the directions of the message or reach out to your retailer
for more information.
A list and definition of error messages: http://geckokeypads.com/k1000errormessages
6 Upkeep of the hot tub
6.1 General information
Do not expose the hot tub to sun without water inside or a cover on top. The direct
sunlight can cause fading and deformation of the surface material. When you are not
using the hot tub, cover it with the thermo cover, regardless of whether it is empty
or full. Protect the hot tub from rain and snow. Place the hot tub under a gazebo or a
roof if possible.
a) Do not open the control unit. There are no user-fixable parts inside.
b) Drain, clean and fill the hot tub with clean water on regular schedule.
c) Clean the filter cartridge at least once a week.
d) The hot tub user should have a proper shower before and after the use of the
hot tub.
6.2 Removal and cleaning of the filter cartridge
The hot tub filter cartridge can get clogged by calcareous and mineral particles from
a hard water, which can lead to a restricted water flow inside the filtration system.
We recommend to clean the filter cartridge at least once a week.
Remove the cartridge and the skimmer insertion. Using a garden hose, clean the
cartridge so that no settled dirt remains in the corners of the filter. Once clean, put
the insertion back to the skimmer. Put the cartridge inside the skimmer tank next