manualshive.com logo in svg

HANSCRAFT IN.K1000, User Manual, Page: 19 / 28

Share
Download
HANSCRAFT IN.K1000 User Manual Download Page 19

19

Control panel

Info messages
By pressing the Display/Hide button, it is 
possible to adjust the display of messages: 
If Hide is selected, the display will only show 
the message Smart Winter Mode and SWM 
purge time. In the opposite case, the message 
will always appear when SWM conditions are 
met. If the Hide option is chosen, messages 
concerning the discharge of heating and 
resuming of filtration will not be displayed.

Warm weather
When a pump is running, it generates heat that 
may increase the water temperature. When 
enabled, the option “Warm Weather” allows 
to avoid the built-in overheating function of 
the filtration. If Warm Weather is set to “OFF”, 
the overheating function of the filtration 
is inoperative and your Hot tub’s filtration 
system will operate continuously even when 
the water temperature is higher.

About
To see information about the appliance, slide 
the right selection circle until the “i” symbol is 
highlighted in the centre. Information about 
various parts of the system, software, and 
revision numbers of individual components of 
the system will be displayed.

Wipe the screen
This message will appear in case of too much 
water detected on the display. Simply wipe 
away the excess water.

5.14 About

5.15  Excess water on the display

Summary of Contents for IN.K1000





























Reviews:

No comments