background image

50

51

20.

  

Important safety information

Please read the relevant safety information and 

limitations-of-use information on the following 

pages before using your hearing aid. 

Intended use

The hearing aid is intended to amplify and 

transmit sound to the ear and thereby 

compensate for impaired hearing.

The Tinnitus feature is intended for use 

by people with tinnitus who also desire 

amplification. It provides supplementary noise 

stimulation which can help defocus the user’s 

attention from their tinnitus.

Intended user

Intended for:

• 

People with hearing loss

• 

Caregivers of the person with hearing loss

• 

Hearing care professional responsible for 

adjusting the hearing aid 

Intended medical indication

Presence of hearing loss:

• 

Unilateral or bilateral

• 

Hearing loss type: conductive, sensorineural or 

mixed

• 

Grades of hearing loss:

- Mild to Profound

Clinical indication for the use of Tinnitus feature 

is: Presence of chronic tinnitus (>3 months, 

after occurrence) in addition to the presence of 

hearing loss

Medical contraindications

Medical contraindications for the use of hearing 

aids are:

• 

Deformity of the ear (i.e. closed ear canal; 

absence of the auricle)

• 

Neural hearing loss (i.e. retro-cochlear 

pathologies such as absent/ non-viable 

auditory nerve)

• 

Evidence of active or chronic middle or outer 

ear pathology, chronic drainage or discharge, 

evidence of chronic inflammation

Summary of Contents for sound FS R312










































Reviews: