background image

4

    Choose the sightline (0-1-2-3) on the measurement tool that is most 

parallel with the top of the opening of the ear canal� In this example, 
the sightline marked 1 would be the most accurate choice�

5

   Make a note of the sightline chosen and then repeat steps 1-4 on the 

opposite ear for a binaural fitting� 

To measure for an accurate wire length.

1

 

  Place your head at the same horizontal level as the patient’s head so 

you are looking straight into the patient’s ear that you wish to fit with 
the hearing instrument�

 

  Hold the measurement tool with the appropriate blue or red color 

code marking (for the left or right ear) with your thumb placed on  
the ear diagram�

3

    Place the measurement tool on the top of the ear and in contact with 

the skin in the narrow gap between the head and the pinna� Keep the 
horizontal line on the measurement tool horizontal and level�

0

1

2

3

0

1

2

3

0

1

2

3

   Note: It is important to measure the opposite ear for a binaural fitting since right and left ear sizes can vary and thus, require different wire lengths.

6

Fitting guide.

Receiver-in-Canal (RIC).

Summary of Contents for sound 13






















Reviews: