Hansa WCF1K Series, Operating Instructions Manual

Page: 20 / 144

- 20 -
Dynamic cooling mode
Touch and hold for 5 seconds, then touch three times. Now use
and to set the dynamic mode (F1- half time, F2- full time). The fan
alternately turns on and off to maintain air circulation even when the re -
quired temperature is reached. This ensures uniform and stable humid-
ity and temperature in the wine cooler for ideal long-term wine storage
conditions.
Weekend mode
This will switch off the displays, interior light and audible alarms. The
cooling process will continue.
To switch the Weekend mode on, touch and hold the power and light
keys simultaneously for five seconds. The indicator light will flash four
times and confirm the mode is on. Mode will switch off automatically af -
ter 96 hours, but to switch the mode off at any time, touch and hold the
power and light keys simultaneously for five seconds.
Temperature alarm
If the temperature rises or falls outside the set temperature range, an
alarm will sound and the display will flash. This may be because:
• The wine cooler has not yet reached the set temperature (when first
switched on).
• There has been a power failure.
• The wine cooler has been overloaded.
• The door is not closed properly.
Push To Open feature
The function is active when the appliance is connected to the power sup-
ply. Push the door slightly toward the appliance, the door will be slightly
ajar, then you can open it all the way.
Do not block the door during automatic opening, it may damage the
mechanism.
Do not block the pin, it is a small element that opens the door. If the pin
is stuck preventing the door from closing, unplug the appliance from the
wall power outlet the pin should return to the correct position after about
10 seconds.
The Push To Open feature operates properly after about 3 seconds after
the door is closed or opened. If the door does not open immediately after
closing it, wait a while.
Door pressure sensitivity adjustment
To change the door pressure sensitivity for Push To Open feature, do the
following:
• Open the door
• Turn the screw at the top centre of the door counter-clockwise to in-
crease sensitivity and clockwise to decrease sensitivity.
• Close the door and check that it is properly adjusted.
Turning the adjustment screw too far may cause the door to open auto -
matically, or the door may not open even with a strong push.