7
Assembly
(see page 60)
Fault
Cause
Remedy
Insufficient water
- Supply pressure inadequate
- Check water pressure (If a pump
has been installed check to see if
the pump is working).
- Regulator filter dirty
- Clean filter in front of the mixer and
on the MTC-thermo cartridge
- Shower filter seal dirty
- Clean filter seal between shower
and hose
Crossflow, hot water being forced
into cold water pipe, or vice versa,
when mixer is closed
- Backflow preventers dirty or leaking - Clean backflow preventers, ex-
change if necessary
Spout temperature does not
correspond with temperature set
- Thermostat has not been adjusted
- Adjust thermostat
- Hot water temperature too low
- Increase hot water temperature to
42 ºC to 65 ºC
Temperature regulation not possible
- thermo cartridge calcified
- Exchange thermo cartridge
- For new installations: basic body in-
correctly connected (should be:
cold right, hot left) or installed with
180º rotation
- Install function block turned through
180º
Safety stop button not operating
- Spring defective
- Button calcified
- Clean spring and/or button, ex-
change if necessary
Valve stiff
- Select stop valve DN9 damaged
- Exchange Select stop valve DN9
Shower or spout dripping
- Select stop valve DN9 damaged
- Exchange Select stop valve DN9
Pushbutton cannot be actuated or is
without function
- Safety guard of isolating valve has
not been removed
- Remove safety guard from isolating
valve
Pushbutton is jammed or stiff
- Seal needs greasing
- Grease the seal
Pushbutton does not snap in
- Select Adapter incorrectly trimmed
- Trim and mount Select Adapter ac-
cording to Fig. 7 (see page 61)
- First, fully press the pushbutton down
into the rosette; then, mount the ro-
sette
Cleaning
(see page 73)
Test certificate
(see page 65)
Spare parts
(see page 72)
XXX = Colors
000 = chrome plated
140 = Brushed Bronze
250 = Brushed Gold-Optic
400 = white/chrome plated
450 = white
600 = black/chrome plated
610 = black
Operation
(see page 71)
Minor leaking may occur briefly during
initial commissioning and interruption/restart
of the water supply.
English
Summary of Contents for ShowerSelect 15738 Series
