Install the Handle
Push the handle over the valve stem. Tighten the set
screw on the bottom of the handle with a 3 mm Allen
wrench. The set screw must engage the slot milled into
the thermoelement.
Install the Handshower
Place a black rubber washer in the short hose end
connector. Screw the short hose end connector to the
handshower outlet on the panel.
Place the screen washer in the long hose end connector.
Screw the long hose end connector to the handshower.
Place the handshower in the handshower holder.
Adjust the Slider
Use a 2.5 mm Allen wrench to adjust the tension on the
slider.
Turn the screw clockwise to make the slider easier to move.
Turn the screw counter-clockwise to make the slider harder
to move.
11
