Hans Grohe Metris S 31063XX1 Installation Instructions / Warranty Download Page 10

10

Limited Lifetime Consumer Warranty

This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe").  This 

warranty is limited to Hansgrohe products which are purchased by a consumer in the United States after March 1, 1996, and 

installed in either the United States or Canada.

WHO IS COVERED BY THE WARRANTY

This warranty extends to the original consumer purchaser only.  This warranty is non-transferable.

WHAT IS COVERED BY THE WARRANTY

This warranty covers only your Hansgrohe manufactured product.  Hansgrohe warrants this product against defects in material 

or workmanship as follows: Hansgrohe will repair at no charge for parts only or, at its option, replace any product or part of 

the product that proves defective because of improper workmanship and/or material, under normal installation, use, service 

and maintenance.  If Hansgrohe is unable to provide a replacement and repair is not practical or cannot be timely made, 

Hansgrohe may elect to refund the purchase price in exchange for the return of the product.  

LENGTH OF WARRANTY

Replacement or repaired parts of products will be covered for the term of this warranty as stated in the following two sentenc-

es.  If you are a consumer who purchased the product for use primarily for personal, family, or household purposes, this war-

ranty extends for as long as you own the product and the home in which the product is originally installed.  If you purchased 

Cleaning Recommendation for Hansgrohe Products

Modern lavatory faucets, kitchen faucets, and showers consist of very different materials to comply with the needs of the 

market with regard to design and functionality.  To avoid damage and returns, it is necessary to consider certain criteria when 

cleaning.

Cleaning Materials for Faucets and Showers

Acids are a necessary ingredient of cleaning materials for removing lime, however please pay attention to the following points 

when cleaning faucets and showers:

Only use cleaning materials which are explicitly intended for this type of application.

Never use cleaning materials which contain hydrochloric, formic, phosphoric, or acetic acid, as they cause considerable 

damage.

Never mix one cleaning material with another.

Never use cleaning materials or appliances with an abrasive effect, such as unsuitable cleaning powders, sponge pads, 

or micro fiber cloths.

Cleaning Instructions for Faucets and Showers

Please follow the cleaning material manufacturer’s instructions.  In addition, pay attention to the following points:

Clean the faucets and showers as and when required

Use the amount of cleaning product and the amount of time recommended by the manufacturer.  Do not leave the cleaner 

on the fixture longer than necessary. 

Regular cleaning can prevent calcification.

When using spray cleaners, spray first onto a soft cloth or sponge.  Never spray directly onto the faucet as droplets can 

enter openings and gaps and cause damage.

After cleaning, rinse thoroughly with clean water to remove any cleaner residue.

Important

Residues of liquid soaps, shampoos, and shower foams can also cause damage, so rinse with clean water after using.

Please note:

 if the surface is already damaged, the effect of cleaning materials will cause further damage.

Components with damaged surfaces must be replaced or injury could result. 
Damage caused by improper treatment is not covered under the warranty.

Summary of Contents for Metris S 31063XX1













Reviews: