Technical Information
Recommended water pressure
15 - 75 PSI
Max. water pressure
145 PSI
Recommended hot water temp.
10° - 140° F*
Max. hot water temp
176°F*
Flow rate @ 44 PSI
4.5 GPM
English
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
For best results, Hansgrohe recommends that
this unit be installed by a licensed, profes-
sional plumber.
Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
This trim is for use with iBox Universal Plus
model 01850181 (not included).
To prevent scald injury, the maximum output
temperature of the shower valve must be
no higher than 10°F. In Massachusetts,
the maximum output temperature can be no
higher than 11° F.
Adjust the rotational limit stop (see page 14)
during installation. Further adjustments may
be necessary due to seasonal water tempera-
ture changes.
Do not install a shut-off device on
either outlet of this valve.
Use of such
a device can defeat the ability of the valve to
balance the hot and cold water pressures.
The pressure balance trim is suitable for a
one-function installation, such as a single
showerhead or handshower.
The pressure balance trim may be used in a
tub/shower application using a diverter tub
spout.
Keep this booklet and the receipt (or other
proof of date and place of purchase) for
this product in a safe place. The receipt is
required should it be necessary to request
warranty parts.
•
•
•
•
•
•
•
•
•
3⅛"
4⅜"
⅝"
6¾"
3⅜"
2¼"
⅝"
6¾"
15404xx1
04355xx0
