Assembly see page 6
Fault
Cause
Remedy
Insufficient water
- Supply pressure inadequate
- Check water pressure (If a pump
has been installed check to see if
the pump is working).
- Filters are dirty (96922000)
- Clean filter in front of the mixer
and on the BTC-thermo cartridge
(96922000)
- Shower filter seal dirty
- Clean filter seal between shower
and hose
- Backflow preventers dirty or leak-
ing
- Clean backflow preventers, ex-
change if necessary
Crossflow, hot water being forced
into cold water pipe, or vice versa,
when mixer is closed
- Backflow preventers dirty or leak-
ing
- Clean backflow preventers, ex-
change if necessary
Spout temperature does not cor-
respond with temperature set
- Thermostat has not been adjusted
Hot water temperature too low
- Adjust thermostat
Increase hot water temperature to
42 ºC to 65 ºC
Temperature regulation not possible
- thermo cartridge calcified
- Exchange thermo cartridge
Shower or spout dripping
- Dirt or sedimentation on valve seat,
shut-off unit damaged
- Clean or exchange shut-off unit
Instantaneous heater didn't work
with thermostat
- Flow limiter in handshower isn’t
removed
- Remove flow limiter
- Filters are dirty
- Clean the filter / exchange filter
- Non return valve hasn't moved
back
- Exchange non return valves
Test certificate
(see page 12)
Cleaning
(see page 13)
Spare parts
(see page 12)
Dimensions
(see page 11)
Operation
(see page 9)
English
Special information for UK
(see page 14)
3
