1
English
Use the following procedure to
remove the cartridge.
Do not attempt to pry the cartridge
from the function block by using
a screwdriver, or damage to the
cartridge will result.
Place the handle on the cartridge stem.
Turn the handle counter-clockwise approximately
¼ turn after hitting the stop.
Reverse the cartridge
If the valve opens through hot, reverse the
cartridge.
Close the stops using a 4 mm Allen
wrench, or turn the water off at the
main (1).
Unscrew the nut (2).
Model 04441000 only:
Install the handle.
Tighten the screw using a 3 mm Allen wrench.
All other models:
Install the handle.
Tighten the handle screw using a 2.5 mm Allen
wrench.
1
2
Ø
4 mm
3 mm
2.5 mm