1
English
Install the handle.
Tighten the handle screw using a 2.5 mm Allen
wrench.
Reverse the cartridge
Use the following procedure to remove the
cartridge.
Do not attempt to pry the cartridge
from the function block by using
a screwdriver, or damage to the
cartridge will result.
Place the handle on the cartridge stem.
Turn the handle counter-clockwise approximately
¼ turn after hitting the stop.
If the valve opens through hot, reverse the
cartridge.
Close the stops using a 4 mm Allen
wrench, or turn the water off at the
main (1).
Unscrew the nut (2).
1
2
4 mm
Ø
