Hans Grohe AXOR Citterio 39456 1 Series, Installation/Warranty, Page: 5 / 12

•
Lower the handshower holder onto the
handshower tee, feeding the hose assembly
under the tub. The hole on the rear of the
handshower holder should go over the
positioning pin on the handshower holder
tee.Install the handshower holder escutcheon
over the handshower holder. Screw it down
over the tee.
•
Position the plate over the valve and
handshower assembly. Press gently into
place.
• Place the hot and cold handle escutch-
eons in the recesses in the plate - hot on
the left, cold on the right. Position each
handle over the valve. Grasp the barrel
of the handle, and turn it clockwise to
tighten it.
•
Inspect the handles, making sure that they
are aligned properly.
• If the handle is not straight, remove it from the valve
by grasping the barrel and turning it counter
clockwise.