Hans Grohe AXOR Citterio 39456 1 Series, Installation/Warranty, Page: 4 / 12

•
Remove the brass plug from the end of
the high pressure hose. Attach the
chrome inner Secu-flex hose. Use the
enclosed Hansgrohe Color towelette to
clean and lubricate the inner hose.
Have a co-worker use the towelette to
clean and lubricate the ends of the
outer hose. If the towelette is missing,
use a soft cloth sprayed with a silicon
lubricant.
•
Disassemble the handshower holder as
shown in the diagram. Feed the inner
hose through the outer hose. Secure
the outer hose at the bottom with the
white plastic winged nut. Remove the
plaster shield. Compress the outer
hose so that the hose end connection
can be grasped.
• Feed the hose end connection through
the handshower holder. Snap the two
halves of the white plastic retainer over
the inner hose. Slide the finished hose
retaining ring over the end of the hose
and the white plastic hose retainer.
Screw it into the handshower holder.