9
Troubleshooting
User Instructions
•
Turn the right handle for cold water, the left handle for hot.
•
To divert the water to the handshower, pull up on the diverter knob. When the water is
turned off, the diverter will automatically reset to the spout position.
•
The handshower has two spray modes: full spray and
soft. To change spray modes, turn the face ring until the
indexing mark is next to the name of the desired function.
•
The handshower uses the Quick-Clean!
TM
cleaning system.
When the spray mode is changed, pins push through the
regular spray channels, clearing them of any scale
deposits.
•
If scale deposits build up on the spray face, pour about 3/4" of a commercial scale
remover, such as Lime-Away
TM
or CLR
TM
, into a shallow dish. Soak just the gray spray face
in the remover for the time specified on the remover label. Do not allow the remover to sit
on the finished surfaces. When finished, rinse the handshower with clear water before
using.
Hansgrohe Internet Dealer www.NeedPlumbingSupplies.com 800-728-8890
Hansgrohe Faucets & More www.NeedPlumbingSupplies.com 800-728-8890
