4
2
3
•
Remove the white plastic handle snap
connectors. Turn the valve stems
clockwise to make sure that they are "off"
(1, 2).
•
Carlton only
- install the handle
escutcheons by threading them onto the
mounting plates..
•
Push the hot handle over the hot stem.
While holding the cross steady with one
hand, turn the bell clockwise.(1) to secure
it to the valve. Repeat with the cold
handle (2)
•
Unscrew and remove the brass plug in
the spout tee with a 27 mm wrench (3)
1
Installation
•
Remove the plastic plaster shields from
the valves and the spout tee.
Hansgrohe Internet Dealer www.NeedPlumbingSupplies.com 800-728-8890
Hansgrohe Faucets & More www.NeedPlumbingSupplies.com 800-728-8890
