Hans Grohe 25015700, Instructions For Use/Assembly Instructions

Page: 6 / 72

6
English
Safety Notes
Wear personal protective equipment (PPE) (safety
shoes, gloves, etc.)
The product may only be used for bathing, hygienic
and body cleaning purposes.
Children as well as adults with physical, mental and/
or sensoric impairments must not use this product
without proper supervision. Persons under the
influence of alcohol or drugs are prohibited from
using this product.
Installation Instructions
• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The plumbing codes applicable in the respective
countries must be observed.
• During installation of the product by qualified trained
personnel, make sure that the entire fastening surface
is even and smooth (no protruding seams or tile
offset), that the finish of the wall is suitable to apply
the product and has no weak points.
• The bonding surfaces must be clean, dry, wax and
grease-free, able to bear weight and free of release
agents. In most case it is best to wipe down the
surface with a clean dry cloth. Do not use any
conventional cleansers containing releaseagents. If
necessary, use an alcohol cleaner or in the case of
waxy natural stone, use a wax-removing cleaner.
Rub this off with a clean, dry cloth before it
evaporates.
• Only use the fastening material provided.
• The RainButton must be completely charged before it
is connected with the iBox Hub.
• Hansgrohe SE hereby declares that the Pontos Base
wireless unit type complies with Directive 2014/53/
EU. The full text of the EU Declaration of Conformity
can be accessed on the following website: pro.
hansgrohe.com
Technical Data
Type plate see page 61
Thermal disinfection
(see page 69)
Thermal disinfection pursuant to process sheet DVGW
W 551 (≥ 70°C / > 3 min) must only be carried out by
qualified personnel.
Important!
While flushing with hot water, all safety functions of the
scalding protection device are deactivated. Water
temperatures in excess of 49°C occur; in addition,
surfaces can get hot. Absolutely avoid contact with
water and surfaces as there is a risk of injury.
Triggering the function:
• Press the temperature button for 5 seconds. An
exclamation mark is displayed.
• Press the temperature button again within 3 seconds
• Then press the volume button
• Now a countdown is started; a flashing exclamation
mark appears at 0.
The function is immediately aborted if any of the buttons
are pressed.
To perform the thermal disinfection, the system
determines within 150 s whether the water temperature
is > 60°C. If this is not the case, the operation is
aborted.
After the last operation, the system must be in a
non-operating state for min. 2 minutes, otherwise
thermal disinfection is not possible.
Disposal of waste batteries
and old Electrical & Electron-
ic Equipment (applicable in the
European Union and other European
countries with separate collection
systems).
This symbol on the battery, the product or the packag-
ing indicates that the battery or the product shall not be
treated as household waste. By ensuring the battery or
product are disposed of correctly, you will help prevent
potentially negative consequences for the environment
and human health. The recycling of the materials will
help to conserve natural resources. To ensure that the
battery or product will be treated properly, hand over
the product at end-of-life to the applicable collection
point for the recycling of batteries, electrical and
electronic equipment. For more detailed information
about recycling of this product or battery, please
contact your local Civic Office, your household waste