You will exit setting automatically after selecting the AM frequency range and stopping operation. The
finally selected frequency range will be the default one.
Note: AM step value is 10KHZIn America, Canada, Mexico and other countries of North America and
South America and is 9KHZ in other countries.
7:3.4: Method of searching channels
Search channels manually using the button/search channels automatically using the button/search and
store channels automatically using the button/the number key/search channels by rotating the shuttle
button.
7.3.4.1: Search channels manually using the button
Lightly press [
] or [
] to decrease or increase progressively at the minimum step value
of wave band.
FM min step value: 0.1MHZ, VHF min step value: 0.0125MHZ
MW min step value: 9KHZ / 10KHZ UHF min step value: 0.0125MHZ
LW min step value: 9KHZ AIR min step value: 0.025MHZ
SW min step value: 0.005MHZ CB min step value: 0.005MHZ
7.3.4.2: Search channels automatically using the button
Long press [
] or [
] for 2 seconds to search channels at the minimum step value of
wave band. Search will stop after finding a channel, and this channel will be played.
7.3.4.3: Search and store channels automatically using the button
In the mode of receiving, long press [
]for 2 seconds to search and store channels automatically.
In process of automatic search, “PRESET” flashes on the primary screen. After a channel is
successfully found, “CH***” appears on the primary screen, which is the address of storing channels.
After a round of search, search will stop automatically, and the first channel stored will be played.
Every band can store 200 channels, 1,600 channels in total (excluding WB).
Note: the number of channels stored depends on local signal intensity.
7.3.4.4: The shuttle button