AM
Ante meridiem of 12-hour system
PM
post meridiem of 12-hour system
Standby time: Display the time.
Bluetooth mode:
Display Bluetooth status
TF card working status: Display the total number of songs & display
the playing time
7: Introduction to functions:
7.1.1: Power on/off:
light press
and the clock will be displayed; light press [
] within 10 seconds and the machine will be
turned on.
When the machine is on, long press [
] for two seconds to close the machine. Clock status will be displayed when the
machine is turn off.
[Note: After power-off, the radio will enter power saving mode (backlight will be off after 5 seconds and the display will be off after 10
seconds). If you need to check the time, press [
].
7.1.2 Set sleep time:
light press [
] to start clock; long press [
] for two seconds to set sleeping mode;
90.80.70.60.50.40.30.20.10 minute
。
When sleep time is displayed, light press [
] to choose automatic sleep
shutdown minutes as 90.80.70.60.50.40.30.20.10 minutes.
After select auto sleep shutdown mode, LCD displays
.
7.2: BAND
:
selection of working mode
The product supports eight working modes which are shown below:
Working state, light press
【
BAND
】
key to switch the above several working modes.
7.3: Volume adjustment: (Volume can be adjusted between 00 and 30)
In the working state, light press [VOL+&VOL-] to adjusts the volume, which can be adjusted between "00-30" volume level as
required.
7.4: Receive RADIO:
The machine can receive FM/VHF/AM/SW/WB and the specific receiving range is as follows:
Different countries have different requirements for FM reception and medium wave reception. The following options are specially
designed.
The factory default value is the first one
FM Mode
VHF Mode
AM Mode
SW Mode
WB Mode
