Fig.1
Fig.2
A1
D
A2
C1
C2
E
B
E
D
K
J
Q
L
G
Q
I
Q
L
P
S
Q
G
L
L
G
Q
Q
G
L
Step 1:
IMPORTANT NOTE: WE RECOMMEND TWO PEOPLE WORK TOGETHER TO ASSEMBLE THE GLIDER
Remove all protective materials and set parts on a flat, non-abrasive surface. Identify parts packed in carton against the parts list. If you are missing
any parts or are unsure how to proceed with assembly,
Assembly references to "left" and "right" are designated by facing the glider and NOT by sitting in it
please call our Product Specialists immediately at
.
Do not attempt to assemble
the chair if any parts are damaged or missing
.
1-800-491-4958
Attach glider base left leg (A1) to one of the glider base leg support bars (B) using 5/16"x35 mm bolts (I) 8.5x1.5 mm washers (L), and 5/16" nuts (P)
as shown in
.
Repeat on glider base right leg (A2). Repeat entire procedure for remaining glider base leg support bar (B).
Attach glider back frame (D) to glider left arm (C1) using 5/16"x52 mm bolts (G), 8.5x1.5 mm washers (L) and 5/16" nuts (P) as shown in
. Attach
seat frame to left arm using 5/16"x52 mm bolts (G), 8.5x1.5 mm washers (L) and 5/16" nuts (P) as shown in
.
Repeat to
attach glider seat back (D) and glider seat frame (E) to glider right arm (C2). Attach glider back frame and glider seat frame using a 1/4"x15 mm bolt (J)
and a 6.5 x 1.0 mm washer (K) as shown in
. Guide bolt and washer through pre-drilled hole in glider seat frame and into pre-drilled hole on glider
back frame.
Step 2:
Do not over tighten.
Step 3:
Do not over tighten.
Do not over tighten.
Fig.1
Fig.2
Fig.2
Fig.3
E
E
E
L
L
P
L
P
L
P
S
S
L
P
Q
R
Q
R
Fig.3
GLIDER BRACKET
