Page 4
ASSEMBLY INSTRUCTIONS
1
2
From behind the chaise lounge back frame, insert a bolt with Ø8.5x1.5 mm washer through the hole in the lower
sling back frame. Add a Ø15x4 mm plastic washer before inserting into the fixed nut in side the sling seat frame
(see diagram).
. Completely tightening at this point could cause the frame or
the sling seat to be uneven. Repeat for the opposite side.
Hand tighten 3-4 revolutions only
Using the hex wrench provided, tighten bolts. Tighten each bolt a few revolutions at time, alternating back
and forth between the two bolts until they are completely tightened. It is important to alternate between bolts
to ensure your frame and sling seat are even.
. Over tightening could damage the threads
on the bolts or nuts.
Do not over tighten
D
E
C
A
B
FOOT CAP
