BEFORE YOU START
05
DISPOSAL
Dispose of the product according
to local regulations. If in doubt,
consult your local authorities.
SPECIFICATIONS
Net weight
approx. 99 lbs (45 kg)
Dimensions
(D x W x H)
approx. 2.9 x 5 x 5.8 ft.
(35 x 60.2 x 70.1 in.)
(89 x 153 x 178 cm)
Storage area
9.5 ft
2
(0.88 m
2
)
• To eliminate mildew, soak a cloth in white
vinegar and scrub the mold and mildew
away.
• To eliminate tree sap, pour some vinegar
over the sap and let it soak thoroughly
before scrubbing hard.
MAINTENANCE
• SHED
: Regularly examine for wear and
tear. Stop using at first sign of damage or if
components become detached.
• ROOF
: Keep clean of leaves and snow with
long handled, soft bristled broom. Heavy
snow or ice on the roof can damage the
shed making it unsafe. Do not step on the
roof. Do not use the roof as additional
storage area. Check the roof regularly for any
damages.
• WALLS
: Do not rest any objects or lean
against the wall panels.
• DOORS
: Keep doors closed to prevent wind
damage.
• DOOR HINGES
: This is the weakest point
on the shed so you should take extra care.
The hinges can seize up after a while so you
should keep them well lubricated.
• MOISTURE
: With changing temperatures,
condensation will accumulate inside the
shed. Good ventilation will help in regulating
and avoid moisture. Open the door
frequently to allow for proper ventilation.
• FASTENERS
: Regularly check that all the
components and fasteners are tightened.
ASSEMBLY INSTRUCTIONS
• Review all instructions before starting
assembly.
• During assembly, carefully follow illustrated
assembly steps and make sure you
understand them fully. If in doubt, consult a
professional builder.
• Plan in advance and book enough time for
the assembly. Rushing often causes errors
and could cause unnecessary injuries. If
you have never assembled a shed before,
take your time. Depending on your level
of experience and the amount of help you
have you might spend a bit more time on
assembly.
• Set the torque on the drill driver to #3 or #4
to ensure the screws do not strip the metal
reinforcements.
CLEANING AND MAINTENANCE
CLEANING
Notice
Never use corrosive detergents, wire brushes,
abrasive scourers, metal or sharp utensils to
clean the product.
• Use a garden hose or power washer to rinse
the shed siding.
• Scrub away the remaining dirt using mild
detergent and water with a cloth.
• Sweep out the shed interiors using a broom.
A leaf blower can be used as well to blow
away all the debris.
Summary of Contents for 9820007
Page 27: ...V01 1021...