User’s Manual
13
REMOTE CONTROL
Installing battery
Remove the battery cover, and insert two AAA(1.5V) batteries; make sure that the polarity of the
battery is consistent with the marks” +/-“ in the battery slot.
Precautions of remote control usage
●
Point the remote control to the receiver window. The objects between remote control and the
receiver window may disturb the normal operation.
●
Keep the remote control away from strong vibration. In addition, do not set or put the remote
control in direct sunshine, which may result in deformation of the remote control.
●
The remote control may be invalid if the receiver window is in direct sunshine or strong light; in
this case ,please adjust the angle of the light or the device, or appreoach the remote control to the
receiver window.
●
The effective range of the remote control may be affected if the battery voltage is low; in this case,
please replace with a new battery; if the remote control won’t be used or battery voltage is too low,
please take out the battery to avoid corrosion due to battery liquid leakage.
●
Do not mix different types of batteries, or used and new batteries.
●
Do not throw the batteries into fire, charge or break up, or charge, short circuit, disassemble, heat
or burn the used batteries. Please follow the environmental protection regulations to disposal of
the batteries.
