background image

User’s Manual 

 

FRONT PANEL CONTROL 

 

 Power Button: 

Press this button to switch ON/OFF of monitor’s power.   
 

 Power Indicator: 

Green  —  Power On mode. 
Orange —  Off mode. 
 

  MENU / ENTER:   

1.  Activate the OSD menu or adjust the function settings and confirmation or 
2.  Exit OSD menu when in volume OSD status. 
 

  Volume < >:   

1.  Activates the volume control when the OSD is OFF. 
2. Navigate through adjustment icons when OSD is ON or adjust a function when 

function is activated. 

 

  Auto Adjust button: 

When OSD menu is in off status, press this button to

 

activate the Auto Adjustment 

function.  
(The Auto Adjustment function is used to optimized the H-Position, V-Position, Clock and 
Focus.) 
 
 

NOTES: 

 

  Do not install the monitor in a location near heat sources such as radiators or air dusts, 

or in a place subject to direct sunlight, or excessive dust or mechanical vibration or 
shock. 

  Save the original shipping box and packing materials, as they will come in handy if you 

ever have to ship your monitor. 

  For maximum protection, repackage your monitor as it was originally packed at the 

factory. 

  To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains 

may be removed with a cloth lightly dampened with a mild detergent solution. Never use 
strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage 
the cabinet. As a safety precaution, always unplug the monitor before cleaning it. 

 

12 

Summary of Contents for AG191






















Reviews: