CONNECTING TO AC POWER
Before operation, please make sure that the VOLTAGE selector on the unit is set to the voltage of your local
area. Unravel the AC power cord, insert one end into the AC socket on the set, and the other end into a
standard AC outlet.
BATTERY OPERATION
Disconnect the AC cord set completely. Open the battery compartment door and insert 6 pieces UM-2 "C"
size batteries into the battery compartment with battery polarity as shown inside the battery compartment.
RADIO OPERATION
1.
Slide the
FUNCTION
Switch to
RADIO
position.
2.
Slide the
BAND
Switch to
AM
or
FM
position.
3.
Turn the
TUNING CONTROL
to your desired radio station.
4.
Adjust the sound level by rotating the
VOLUME
Control
ANTENNA
For best reception, fully extend the FM Antenna to receive FM stations. For AM reception, the unit has a
built-in antenna, turn the whole unit for best reception.
MP3/AUX IN CONNECTION
1.
Insert one side of the audio cable (requires 3.5mm stereo plug, not supplied) into the line-out jack or
phones jack on your MP3 player and the other side to the aux-in jack on the unit.
2.
Turn on the unit and slide the function selector to
CD/USB/AUX
position.
3.
Turn on your MP3 player and follow the playback instruction.
4.
To stop this function, simply turned off your MP3 player.
CD/MP3/USB OPERATION
Playing Audio CDs
1.
Set the
FUNCTION
Switch to
CD/USB/AUX
position.
2.
Press the
CD/USB
button to select
CD
mode, CD icon will appear on the LCD display.
3.
Insert a CD disc in the CD compartment and close the CD door, the unit will start reading the disc, it
will show the total number of tracks of the entire disc after reading.
4.
Press the
PLAY/PAUSE
button to start playing the disc.
5.
During playing, press the
PLAY/PAUSE
button to temporarily pause playing. To resume, press the
PLAY/PAUSE
button again.
Playing MP3 Discs
1.
Set the
FUNCTION
Switch to
CD/USB/AUX
position.
2.
Press the
CD/USB
button to select the
CD
mode, CD icon will appear on the LCD display.
3.
Insert a MP3 disc into the CD Compartment and close the door, the unit will start reading the disc, it
will show the total number of songs of the entire disc after reading.
4.
Press the
PLAY/PAUSE
button to start playing the disc.
5.
Press the
FOLDER UP
button to select the folder you want to listen.
6.
During playing, press the
PLAY/PAUSE
button to temporarily pause playing. To resume, press the
PLAY/PAUSE
button again.
-3-
Playing MP3 files with USB
1.
Set the
FUNCTION
Switch to
CD/USB/AUX
position.
2.
Press the
CD/USB
button to select the
USB
mode, USB will appear on the LCD display.
3.
Plug your USB device into the USB port on the unit, the unit will start reading the files in the USB
device, it will show the total number of tracks of the device after reading.
4.
Press the
PLAY/PAUSE
button to start playing the MP3 files.
5.
Press the
FOLDER UP
button to select the folder you want to listen.
6.
During playing, press the
PLAY/PAUSE
button to temporarily pause playing. To resume, press the
PLAY/PAUSE
button again.
Skip Mode
1.
During play or pause mode, press the
SKIP UP
button to go to the next track.
2.
For MP3 files with folders, when the end of the folder is reached, press the SKIP UP button will go to
the first track of the next folder.
3.
During play or pause mode, press the
SKIP DOWN
button to go back to the beginning of the track.
4.
During play mode, press the
SKIP DOWN
button twice will go back to the previous track.
5.
For MP3 files with folders, when reaching the beginning of the folder, press the
SKIP DOWN
button
will go to the last track of the previous folder.
Different Play Mode
Press the
MODE
button to select different kinds of play mode with the following sequence.
For Audio CDs : Repeat Repeat All Random Normal
For MP3 Files : Repeat Repeat Album Repeat All Random Normal
Repeat – repeat the track being played.
Repeat All – repeat all the tracks in the storage media.
Repeat Album – repeat all the tracks in the entire album/folder.
Random – all the tracks in the storage media will be played in random order selected by the player.
Normal – play the tracks in sequence.
Programming
In case of Playing Audio CD
The programming should be done during
STOP
mode
1.
Press the
PROGRAM
button, the LCD display will show
P01
and flash.
2.
Use the
SKIP UP
or
SKIP DOWN
button to select the desired track.
3.
Press the PROGRAM button again to store the selected track in the memory, the LCD display will
show
P02
and flash continuously.
4.
Repeat steps 2 to 3 to store more tracks in the memory. You can store up to 20 tracks in the memory.
5.
Press the
PLAY/PAUSE
button to start playing the disc in the programmed order.
6.
To stop playing, press the
STOP
button.
7.
To cancel the programming list, press the STOP button and open the CD compartment door or select a
different function
OFF/AUX
or
RADIO
.
In case of Playing MP3
All procedure is same as Audio CD. But if you have directory in your disc, you can select folder/album and
track both.
-4-
