background image

11.  Only use attachments/accessories specified by the manufacturer. 
12.  Use only with the cart, stand, tripod, bracket, or table specified by 

the manufacturer, or sold with the apparatus. When a cart is used, 
use caution when moving the cart/apparatus combination to avoid 
injury from tip-over. 

13.  Unplug this apparatus during lightning storms or when unused for long periods of 

time. 

14.  Refer all servicing to qualified service personnel. Servicing is required when the 

apparatus has been damaged in any way, such as power-supply cord or plug is 
damaged, liquid has been spilled or objects have fallen into the apparatus, the 
apparatus has been exposed to rain or moisture, does not operate normally, or has 
been dropped. 

15.  Grounding or Polarization – This product may be equipped with a polarized 

alternating-current line plug (a plug having one blade wider than the other). This 
plug will fit into the power outlet only one way. This is a safety feature. If you are 
unable to insert the plug fully into the outlet, try reversing the plug. If the plug should 
still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat 
the safety purpose of the polarized plug. 

16.  Alternate Warnings – This product is equipped with a three-wire ground-type plug, a 

plug having a third (grounding) pin. This plug will only into a grounding-type power 
outlet. This is a safety feature. If you are unable to insert the plug into the outlet, 
contact your electrician to replace your obsolete outlet. Do not defeat the safety 
purpose of the grounding-type plug.   

17.  Ventilation – Slots and openings in the cabinet are provided for ventilation and to 

ensure reliable operation of the product and to protect it from overheating, and 
these openings must not be blocked or covered. The openings should never be 
blocked by placing the product on a bed, sofa, rug, or other similar surface. This 
product should not be placed in a built-in installation such as a bookcase or rack 
unless proper ventilation is provided or the manufacturer’s instructions have been 
adhered to. 

18.  The MAINS plug or an appliance coupler is used as the disconnect device, the 

disconnect device shall remain readily operable. 

19. 

: CLASS II apparatus with double insulation, and no protective earth provided. 

20.  Caution Marking and rating plate was located at bottom enclosure of the apparatus. 
21.  WARNING : To reduce the risk of fire or electric shock, do not expose this apparatus 

to rain or moisture. 

22.  The apparatus shall not be exposed to dripping or splashing and that no objects 

filled with liquids, such as vases, shall be placed on apparatus. 

23.  The mains plug is used as disconnect device. The mains plug of apparatus should 

not be obstructed OR should be easily accessed during intended use. To be 
completely disconnect the power input, the mains plug or apparatus shall be 
disconnected from the mains. 

- 2 - 

24.  Battery shall not be exposed to excessive heat such as sunshine, fire or the like. 
25.  Excessive sound pressure from earphones and headphone can cause hearing loss. 

 

 

FCC NOTICE 

This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause harmful interference to radio 
communications. 
However, there is no guarantee that interference will not occur in a particular installation. 
If this equipment does cause harmful interference to radio or television reception, which 
can be determined by turning the equipment off and on, the user is encouraged to try to 
correct the interference by one or more of the following measures: 
– Reorient or relocate the receiving antenna. 
– Increase the separation between the equipment and receiver. 
– Connect the equipment into an outlet on a circuit different from that to which the 

receiver is needed. 

– Consult the dealer or an experienced radio/TV technician for help. 

 

This device complies with part 15 of the FCC Rules. Operation is subject to the following 
two conditions : 
(1) This device may not cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause undesired operation. 

 
WARNING: 

Changes or modifications to this unit not expressly approved by the party responsible for 
compliance could void the user's authority to operate the equipment. 
 
 
 
 
 
 
 
 
 
 
 
 
 

- 3 - 

Summary of Contents for HX-300CD











Reviews: