manualshive.com logo in svg

Hanna Instruments HI97750, Instruction Manual, Page: 22 / 36

Share
Download
Hanna Instruments HI97750 Instruction Manual Download Page 22

22

METHOD PROCEDURE

8.  METHOD PROCEDURE

8.1.  POTASSIUM LOW RANGE

REQUIRED REAGENTS
Code Description  Quantity

HI93750A-0

 

Potassium Reagent A 

6 drops

HI93750B-0

 

Potassium Reagent B 

1 packet

REAGENT SETS

HI93750-01

   Potassium Reagent - 100 tests

HI93750-03

   Potassium Reagent - 300 tests

For other accessories see ACCESSORIES section.

MEASUREMENT PROCEDURE

• Select the 

Potassium LR

 using the procedure described in the RANGE SELECTION 

section.

Note: 

If tutorial mode is disabled follow the measurement procedure below. If the 

tutorial mode is enabled, press 

Measure

 and follow the messages on the screen.

• Fill the cuvette with 10 mL of sample (up to 

the mark).

• Add 6 drops of 

HI93750A-0 

Potassium 

Reagent A. Replace the plastic stopper and the 
cap. Swirl the solution.

• Insert the cuvette into the holder and ensure 

that the notch on the cap is positioned securely 
in the groove.

10 mL

×

6

Summary of Contents for HI97750





































Reviews:

No comments