Hanna Instruments HI97712 Instruction Manual Download Page 14

14

GENERAL OPERA

TIONS

Press 

Del All

 to erase all the logged data. If 

Del All

 is pressed, follow the prompt to 

confirm. Press 

Yes

 to delete all logged data, 

No

 or the 

 key to return to the log 

recall.

6.5.  GENERAL SETUP

Press the 

 key to enter the menu. Use the functional keys to select 

Setup

 and 

press 

Select

. Use the functional keys to highlight desired option.

Backlight

Option: 0 to 100 %

Press 

Modify

 to access the backlight intensity. Use the functional keys to increase or 

decrease the value. Press 

Accept

 to confirm or the 

 key to return to the 

Setup

 

menu without saving the new value.

 

Contrast

Option: 0 to 100 %

Press 

Modify

 to change the display’s contrast. Use the functional keys to increase or 

decrease the value. Press 

Accept

 to confirm the value or the 

 key to return to the 

Setup

 menu without saving the new value.

 

Date & Time

Press 

Modify

 to change the date and time. Press the functional keys to highlight the 

value to be modified (year, month, day, hour, minute or second). Press 

Edit

 to modify 

the highlighted value. Use the functional keys to change the value.
Press 

Accept

 to confirm or the 

 key to return to the previous screen.

 

 

Summary of Contents for HI97712

































Reviews: