manualshive.com logo in svg

Hanna Instruments HI97106, Instruction Manual, Page: 12 / 28

Share
Download
Hanna Instruments HI97106 Instruction Manual Download Page 12

General Operations 

12

5.3.  GENERAL SETUP

Press the 

 key to enter the menu. 

Use the functional keys to select 

Setup

 and press 

Select

. Use the functional keys to highlight desired option.

Backlight

Option: 0 to 100 %

Press 

Modify

 to access backlight intensity.

Use the functional keys to increase or decrease the percentage intensity value.  
Press 

Accept

 to confirm or the 

 key to return to the 

Setup

 menu without saving the new value.

 

Contrast

Option: 0 to 100 %

Press 

Modify

 to change the display’s contrast. Use the functional keys to increase or decrease the percentage 

contrast value. 
Press 

Accept

 to confirm the value or the 

 key to return to the 

Setup

 menu without saving the new value.

 

Date & Time

Press 

Modify

 to change the date and time. 

Press the functional keys to highlight the value to be modified (year, month, day, hour, minute, or second). 
Press 

Edit

 to modify the highlighted value. Use the functional keys to change the value.

Press 

Accept

 to confirm or the 

 key to return to the previous screen.

 

 

Time Format

Option: AM/PM, 24-hour 

Press the functional key to select the desired time format.

Summary of Contents for HI97106





























Reviews:

No comments