19
BATTERY REPLACEMENT
When the remaining battery life is less than 10% the battery tag blinks on the
display to warn the user.
Battery Error Prevention System (BEPS)
If the battery is too weak (“
0%
”) the display shows “
bAtt
“, “
DEAD
“ for a few seconds then the
meter powers off. Immediately replace the batteries with new ones.
The batteries are accessed by opening the battery cover on the back of the instrument. Remove
protective boot if present.
Replace the three 1.5V AAA alkaline batteries located in the battery compartment, observing
the indicated polarity.
Replace the battery cover making sure that the gasket is in place.
BA
TTERY REPLACEMENT