Hanna Instruments HI 9829, Instruction Manual

Page: 72 / 99

72
• The tag information window will appear. Press <OK> to return to the previous
screen or <Modify> to modify the tag ID.
Note If the typed SN is not stored in memory, the warning message “SN not
found” will be displayed.
Search ID
• Select “Search ID” to search for a tag by ID.
• Enter the identification code using the meter key-
pad and then press <Accept>.
• The tag information window will appear. Press
<OK> to return to the previous screen or
<Modify> to modify the tag ID.
Note If the inserted ID is not present in memory, a warning message will be
displayed.
Add tag manually
• Select “Add tag manually” to enter an ID code for a tag without using the tag
reader (e.g. if the tag is not physically available).
• Enter the tag serial number using the meter key-
pad and then press <OK>.
• Enter the ID code for the tag and then press
<OK>.
• The meter will now display the new tag informa-
tion.
Clear tag memory
• Select “Clear tag memory” to clear all tag information from the meter memory.
• The message “Do you want to perform the current operation?” appears.
• Press <Yes> to confirm or <No> to return to the previous screen.
• To return to measurement mode, press ESC.