manualshive.com logo in svg

Hanna Instruments HI 9828, Instruction Manual, Page: 48 / 60

Share
Download
Hanna Instruments HI 9828 Instruction Manual Download Page 48

48

When D.O. percentage saturation is calibrated, also D.O. concentra-
tion is calibrated as a result and viceversa.

6.4 CONDUCTIVITY

• From the GLP data main menu, select Con-
ductivity entry and press OK. In this menu it is
possible to visualize calibration data for conduc-
tivity, actual conductivity and salinity.

• All the information relative to the last Conductivity calibration appear: the
calibrated point, the cell constant value, the calibration type (conductivity, actual
conductivity or salinity), time and date.

• With the arrow keys it is possible to scroll between the last 5 memorized cali-
brations.

For Conductivity GLP calibration data different screen types are possible: con-
ductivity, actual conductivity and salinity.

NOTES:

 The C label near the calibration point is for custom and the H is for

Hanna.

6.5 ATMOSPHERIC PRESSURE

• From the GLP data main menu, select the Atmospheric pressure entry and
press OK.

• All the information relative to the last Atmo-
spheric pressure calibration appear: custom cali-
bration point, time and date; the message “Fac-
tory calibr. restored” in case of restoring factory
calibration data.

• With the arrow keys it is possible to scroll between the last 5 memorized cali-
brations.

Summary of Contents for HI 9828





























































Reviews:

No comments