2 9
A u t o E nd
To freeze the first stable reading on the LCD press
AutoEnd
while the instrument is in measurement
mode.
The ”HOLD” tag will be displayed blinking on the
LCD until the reading will stabilize.
When the reading is stable, the “HOLD” tag stops blinking and the reading
is frozen on the LCD.
Press
AutoEnd
again to return to normal measurement mode.
Note:
Pressing
2nd
then
MODE
the instrument will skip to the displayed range,
without leaving AutoEnd mode. The
LOG
key also holds AutoEnd mode.
Pressing
2nd
then
SETUP
,
GLP
or
RCL
, the instrument leaves AutoEnd
mode and performs the selected function.
AutoEnd CLR