2 7
This feature allows the user to log pH, Rel mV or ISE measurements, together
with corresponding mV and temperature automatically. All logged data can
be transferred to a PC through the RS232 port.
The maximum logging space is 150 record locations (50 records on each range).
LOGGING THE CURRENT DATA
To store the current reading into memory, press
LOG
while in measurement mode.
The instrument will display the current date (mm.dd)
on the primary LCD, the record number on the secondary
LCD, together with “LOG” tag and then the free
locations number.
If there are less than 6 memory locations remaining,
the “Lo” message will blink for a few seconds to alert
the user, and then the free locations number is displayed
on the LCD.
If the LOG space is full, “FULL LOC” message will be
displayed on the LCD for a few seconds with “LOG”
tag blinking, and then ”FrEE 0” message.
The instrument returns to normal measurement mode.
VIEW LOGGED DATA
Press
2nd
then
RCL
to retrieve the information stored
while in measurement mode for the specific range.
If no data were logged, the instrument will display
“no rEC” message blinking.
Otherwise, the instrument will display the memorized data, in according with
the selected range:
• If RCL mode was invoked while the instrument was
in pH range: the last
pH
memorized reading on
the primary LCD and the record number on the
secondary LCD.
• If RCL mode was invoked while the instrument
was in mV or Rel mV range: the last
Rel mV
memorized reading on the primary LCD and the
record number on the secondary LCD.
L O G G I N G
LOG CFM
RCL
