15
14
PRINTING / RECORDING
WITH HI 955201 AND HI 955202
To print the measured val-
ues, press PRINT.
The printout provides the fol-
lowing information:
a - Current sample number
b - Accumulative time
c - Temperature value
d - Channel # (HI 955202)
RECORDING MODE
(PROGRAMMED PRINTOUTS )
Press the RECORD key to
enter the recording mode. The
log number will be displayed
for a few seconds to indicate
the correct operational mode.
The meter will write the first
measurement(s) taken in that
moment, and print at the se-
lected interval thereafter until
the ON/OFF key is pressed.
The printout provides the fol-
lowing information:
a - Current log number
b - Current sample number
(in that particular log)
c - Printing interval in minutes
d - Time accumulated since printing started
(HH.MM)
e - Temperature value(s)
f - Channel number (HI 955202 only).
In HI 955202, if only one probe is plugged in, the
meter will print only the value of the connected
probe. If the second probe is
not connected during the re-
cording mode, the data from
the second probe will not be
printed.
LOG
INTV
ON/OFF
CH
°C
LOG
RECORD
TIME
DATE
UP
TEMP
INTV
TIME
TEMP
CH
°C
CH
°C
CHANNEL
The time, date and printing interval are now
set and stored in the memory even when the
display is switched off.
TO VIEW DATE, TIME & TEMPERATURE
(for HI 955301 and HI 955302 only)
To view the time, press the TIME key. The
selected interval is also displayed on the
secondary LCD.
To view the date, press the UP key while the
LCD is displaying the time.
To view the temperature, press TEMP.
Pressing UP or DOWN key will toggle between
monitoring channel #1 or #2 (HI 955302 only).
The channel# is displayed together with the
"CH" indication.
If the TEMP key is pressed again, the resolution
of the printed data can be selected between
0.1°C and 1°C. The resolution of logged data will
always be 0.1°C.
0001 *10.25
#1 20.0 °C
#2 85.5 °C
#3 ---- °C
#4 ---- °C
.
.
.
.
a
d
b
c
==07== 0005M
0014 *01.05
#1 25.0 °C
#2 27.3 °C
.
.
a
b
f
c
d
e
