background image

6

SPECIFICATIONS OF

HI93542 & HI93552

SPECIFICATIONS

Range (*)     K

-200.0 to 999.9°C / 1000 to 1371°C
-328.0 to 999.9°F / 1000 to 2500°F

                

J

-200.0 to 999.9°C

-328.0 to 999.9°F / 1000 to 1832°F

                

T

-200.0 to 400.0°C
-328.0 to 752.0°F

Resolution     K

0.1°C (-149.9 to 999.9°C)

0.2°C (-200.0 to -150.0°C) / 1°C (1000 to 1371°C)

0.1°F (-24.9 to 999.9°F) / 0.2°F (-249.9 to -25.0°F)

0.3°F (-328.0 to -250.0°F) / 1°F (1000 to 2500°F)

                

J

0.1°C (-200.0 to 999.9°C)
0.1°F (-149.9 to 999.9°F)

0.2°F (-328.0 to -150.0°F) / 1°F (1000 to 1832°F)

                

T

0.1°C (-149.9 to 400.0°C)

 0.2°C (-200.0 to -150.0°C)

0.1°F (0.0 to 752.0°F) / 0.2°F (-270.0 to -0.1°F)

0.3°F (-328.0 to -270.1°F)

Accuracy

±0.5°C (-100.0 to 999.9°C) / ±1°C (outside)

(@20°C/68°F)

 ±1°F (-148.0 to 999.9°F) / ±1.5°F (outside)

for one year, excluding probe error

Battery

3x1.5V AA (IEC LR6) batteries,

approx. 500 hours of continuous use (BL off)

Auto-off

user selectable: 60 min or disabled (

HI 93542

)

user selectable: 8 min, 60 min, disabled (

HI 93552

)

Environment

-10 to 60°C (14 to 140°F); RH 100%

Dimensions

150 x 80 x 36 mm (5.9 x 3.1 x 1.4")

Weight

235 g (8.3 oz.)

(*) 

Range may be limited by probe.

Summary of Contents for HI 93542





















Reviews: