22
• The
HI 8936
transmitter may be wall-
mounted at any convenient location close
to the measurement site.
To minimize thermal drifts due to extreme
temperature fluctuations, particularly for
outdoors measurements, it is recom-
mended to protect the transmitter inside
a casing.
• For the installation of the
HI 7635
conductivity probe, use rubber
seals between the probe and the pipe or elbow joints. A pipe sealant
is also recommended to ensure a leak free joint. When screwing the
joints, take care not to overtighten as excessive pressures can dam-
age the probe.
• The
HI 7635
conductivity probe is sup-
plied with a 3 m (10') cable. The 6-core
cable of the probe is connected to the
HI
8936
transmitter as shown. The connec-
tions are color coded for an easy instal-
lation.
See page 21 for the proper connection
scheme.
