background image

20

WARRANTY

HI8666 is warranted for one year against
defects in workmanship and materials when
used for its intended purpose and main-
tained according to instructions.
This warranty is limited to repair or replace-
ment free of charge.

Damages due to accidents, misuse, tamper-
ing or lack of prescribed maintenance  are
not covered.

If service is required, contact the dealer
from whom you purchased the instrument.
If under warranty, report the model number,
date of purchase, serial number and the
nature of the failure. If the repair is not
covered by the warranty, you will be notified
of the charges incurred.  If the instrument is
to be returned to Hanna Instruments, first
obtain a Returned Goods Authorization Num-
ber from the Customer Service department
and then send it with shipments costs pre-
paid.  When shipping any instrument, make
sure it is properly packaged for complete
protection.

To validate your warranty, fill out and return
the enclosed warranty card within 14 days
from the date of purchase.

All rights are reserved. Reproduction in whole
or in part is prohibited without the written
consent of the copyright owner.

Hanna Instruments reserves the right to modify
the design, construction and appearance
of its products without advance notice.

Summary of Contents for HI 8666

























Reviews: