12
13
In the Setup mode the instrument’s parameters can be changed. Some parameters affect the measuring
sequence and others are general parameters that change the behavior or appearance of the instrument.
Press
SETUP
to enter the setup mode.
Press
ESC
or
SETUP
to return to the main screen.
A list of setup parameters will be displayed with currently
configured settings. Press
HELP
for additional information.
Press the
keys to select the parameter and select a
new value as follows:
Backlight
Values:
0
to
8
.
Press
Modify
functional key
to access the backlight value.
Use the
WX
functional keys or the
keys to increase/
decrease the value.
Press
Accept
functional key
to confirm or
ESC
to return to the setup
menu without saving the new value.
Contrast
Values
:
0
to
20
.
This option is used to set the display’s contrast.
Press
Modify
functional key
to change the display’s contrast.
Use the
WX
functional keys or the
keys to increase/
decrease the value.
Press
Accept
functional key to confirm the value or
ESC
to return to the
setup menu without saving the new value.
SETUP
SETUP
SETUP
SETUP
SETUP
DATA MANAGEMENT
The instrument features a data log function to help you keep track of all your analysis. The data log can
hold 200 individual measurements. Storing, viewing and deleting the data is possible using
LOG
and
RCL
keys.....
Storing data
: You can store only a valid measurement. Press
LOG
and the last valid measurement will be
stored in a stack as a record with date and time stamps.
Viewing and deleting
: You can view and delete the data log by pressing the
RCL
key. Deleting is based
on the LIFO (last in, first out) scheme. Additionally, you can delete the data records all at once.
CHEMICAL FORM
Chemical form conversion factors are pre-programmed into the instrument and are method specific. In order
to view the displayed result in the desired chemical form press the
or
to access to the second level
of functions and then press the
Chem Frm
functional key to toggle between the existing chemical forms for
the selected method.
•
After the desired method was selected, follow the measurement described in the related section.
•
Before performing a test you should read all the instructions carefully.