36
The mV Setup menu allows the user to set the parameters associated with mV and Relative mV
measurements.
Accessing mV Setup
• Press
while in
Measure mode and then
or
to select mV / mV Rel range.
• Press
and then
to access mV Setup menu.
To access a mV Setup option:
• Use
or
to highlight the desired option.
• Press
to access the selected option.
The following is a detailed description of the mV Setup option
screens.
Profile
– See
pH Setup section.
Temperature
– See
pH Setup section.
Sample ID
– See
pH Setup section.
Stability Criteria
– See
pH Setup section.
Reading Mode
– See
pH Setup section.
Log
– See
pH Setup section.
Alarm
– See
pH Setup section.
Note
: The Alarm Limits (Low and High) are set in mV units.
m V
m V
m V
m V
m V S E T U P
S E T U P
S E T U P
S E T U P
S E T U P
81
TDS
TDS
TDS
TDS
TDS S E T U P
S E T U P
S E T U P
S E T U P
S E T U P
The TDS Setup menu allows the user to set the parameters related to the TDS measurement.
Accessing TDS Setup
• Press
while in
Measure mode and then
to
select TDS range.
• Press
and then
to access TDS Setup menu.
To access a TDS Setup option:
• Use
or
to highlight the desired option.
• Press
to access the selected option.
The following is a description of the TDS Setup option screens.
Reading Mode
- see
Resistivity Setup section.
Profile -
see
Conductivity Setup section.
Temperature
-
see
Conductivity Setup section.
Units
This option allows the user to set the TDS measuring range
ppm(mg/L), ppt(g/L), AutoRanging
To select the suitable unit:
• Use
or
to highlight the
TDS Units
.
• Press
to confirm and then use
or
to highlight the convenient measuring range option.
• Press
to confirm your selection or press
to
cancel operation.