manualshive.com logo in svg

Hanna Instruments HI 4321, Instruction Manual, Page: 42 / 60

Share
Download
Hanna Instruments HI 4321 Instruction Manual Download Page 42

42

Make sure the instrument has been calibrated before taking conductivity measurements.

DIRECT MEASUREMENT

To measure the conductivity of a sample using the Direct reading
mode:
• Press 

 and then 

 to select conductivity

measure mode.

• Select the 

Direct reading mode (see Conductivity Setup).

• Submerge the conductivity probe and tap

 

it repeatedly to

remove any air bubbles  that may be trapped inside the sleeve.

Allow time for the reading to stabilize.

• The measured conductivity value will be displayed.

Note:

If the reading is out of range, “-----” will be displayed.

DIRECT/AUTOHOLD MEASUREMENT

To measure conductivity of a sample using the Direct/AutoHold
reading mode:
• Select the Direct/AutoHold reading mode (see 

Conductivity

Setup).

• If pressing 

, the “AutoHold” indicator will start blink-

ing on the display  until the stability criterion is reached. The
conductivity  value will be frozen on the display,  along with
“AutoHold” indicator.

• To return to normal measure mode press 

.

CONDUCTIVITY MEASUREMENT

CONDUCTIVITY MEASUREMENT

CONDUCTIVITY MEASUREMENT

CONDUCTIVITY MEASUREMENT

CONDUCTIVITY MEASUREMENT

Summary of Contents for HI 4321





























































Reviews:

No comments