manualshive.com logo in svg

Hanna Instruments HI 4321, Instruction Manual, Page: 10 / 60

Share
Download
Hanna Instruments HI 4321 Instruction Manual Download Page 10

10

For each measurement mode (Conductivity, Resistivity, TDS or Salinity) the following display configurations
are available: Basic, Good Laboratory Practice (GLP), Graph and Log History.

Basic

Accessing this option, the measured value and its units are dis-
played on the LCD, along with the temperature value, temperature
compensation mode, and minimal GLP data.
To choose the Basic displaying mode:
• Press 

 while in 

Measure mode. The “Choose Display

Configuration” message will be displayed in the Reminder
messages area.

• Press 

. The instrument will display the basic informa-

tion for the selected measurement mode.

GLP

Accessing this option, a detailed GLP data will be displayed on the

LCD for conductivity and salinity (Percent Scale only)

  measure

modes: Last Calibration Date and Time, Cell Constant, Probe

Offset, Reference Temperature, Compensation Coefficient, Tem-

perature Compensation.
To access the GLP displaying mode:
• Press 

 while in 

Measure mode. The “Choose Display

Configuration” message will be displayed in the Reminder

messages area.

• Press 

. The instrument will display the detailed GLP

data.

DISPLAYING MODES

DISPLAYING MODES

DISPLAYING MODES

DISPLAYING MODES

DISPLAYING MODES

Summary of Contents for HI 4321





























































Reviews:

No comments